BAPI LSBASE2 Room Temperature Sensor

BAPI LSBASE2 Room Temperature Sensor
Images for general purposes only. Actual may be different than depicted.
BAPI LSBASE2 Room Temperature Sensor BAPI LSBASE2 Room Temperature Sensor

BAPI LSBASE2 Room Temperature Sensor

SKU: LSBASE2
Rating:
* This Product is Now Obsolete
No Replacement Available
0
0
0
0
0
LSBASE2
Room Temperature Sensor

BAPI’s line of sensors includes the LSBASE2 and LSPLUS2 and are designed for use with Automated Logic’s S, U, ZN and SE line controllers. Both sensors provide precision temperature measurement in an attractive low profile enclosure. In addition, the LSPLUS2 offers a local setpoint adjustment, override to an occupied mode and LED indication of current status–all within boundaries established by the Building Automation System (BAS) operator. When the override button is pressed during an unoccupied mode, the zone reverts to an occupied setpoint for a predetermined period of time. Local setpoint override enables an occupant to increase or decrease the zone setpoint by a preset amount. If the sliding setpoint adjustment is positioned in the center, the setpoint override is defeated.

Features:
  • Attractive, low profile enclosure in a neutral color complements any room.
  • Precise 10K ohm thermistor with ±0.36ºF (0.2ºC) standard accuracy and less than 0.18ºF (0.1ºC) drift over a ten year span – requires no maintenance or recalibration
  • LSBASE2 and LSPLUS2 sensors can be interchanged without calibration.
  • Mounts on a standard 2" by 4" electrical box for easy installation.
Overall Dimensions 2.75" (width) by 4.75" (height) by 1.08" (depth) 69.9mm (width) by 120.7mm (height) by 27.4mm (depth)
Mounting Standard 2" by 4" electrical box using 6-32 by 1/2" mounting screws provided
Wiring Four connector shielded or unshielded cable - 18 to 24 AWG recommended. Connects to LS2 connectors on ZN or SE controller and uses two of the controller’s available Universal Inputs.
Communications LS2 sensors do not support pass-through communications to the building automation system. Use RS sensors if this feature is required.
Power S, U, ZN, or SE Controllers
Temperature Sensor Precision 10K-2 Thermistor. Standard accuracy ±0.36°F (0.2°C). Less than ±0.18°F (0.1°C) drift over a 10 year period.

Q & A: Ask the Questions, share answers

Do you have questions about this product?