Honeywell C6097A3095 Pressure Switch Break on Fall Manual Reset 0.4" to 5.0" W.C.
The pressure switch monitors extremely low pressure differentials and triggers switch-on, switch-off or switch-over operations if a set switching point is reached. The switching point can be adjusted using a hand wheel. The pressure switch monitors positive and negative gas pressures on various industrial gas and air appliances, such as boiler fan monitoring and differential pressure monitoring in firing, ventilation and air-conditioning systems. Pressure switch C6097A switches in the event of decreasing pressure, C6097B switches in the event of increasing pressure
Adjusting Range: 0.4-4 W.C (1-10 mbar)
Maximum Inlet Pressure with Venting Line: 8.5psi (600 mbar)
Maximum Inlet Pressure without Venting Line: 7psi (480 mbar)
Lock-off: Yes
Difference between switching pressure and possible reset: 0.16-0.4 W.C (0.4-1 mbar)
Medium: Air/Gas
NPT Connection: 1/4"
Switching properties at setpoint value: NO-to-COM connection is interrupted if the pressure drops
Handwheel Setting/Switching Point: Hand wheel set to decreasing pressure/C6097 switches with falling pressure and locks off
Positive Pressure: Gas, Air, Flue Gas or Biogas
Negative Pressure: Air, Flue Gas
Electrical Connection: Screw Terminals and 1/2" NPT conduit
Note: Flange mount connection is no longer available and the C6097A3095 has a 1/4" NPT connection. 
$ USD
CAD 
