1-866-494-4610
Mon - Fri: 9am - 5pm EST
 

1-866-494-4610
Mon - Fri: 9am - 5pm EST

Honeywell ZD12X14TZ Parallel Blade Damper 2-Position Spring Return 24V (12" Length x 14" Height)

Honeywell ZD12X14TZ Parallel Blade Damper 2-Position Spring Return 24V (12" Length x 14" Height)
Images for general purposes only. Actual may be different than depicted.
Honeywell ZD12X14TZ Parallel Blade Damper 2-Position Spring Return 24V (12" Length x 14" Height)

Honeywell ZD12X14TZ Parallel Blade Damper 2-Position Spring Return 24V (12" Length x 14" Height)

SKU: ZD12X14TZ
Rating:
Quantity Price Stock
2
Usually Ships 1-2 Weeks
$246.17     /ea
2

Buy in Bulk & Save

Quantity Price
3+ $233.94 /ea

The ZD12X14TZ found on this page, is a direct replacement for the following obsolete item(s):

Obsolete Product SKU
Zone First ZDB-12X14 Zone Damper Parallel 2-Position Spring Return 24V [12" H x 14" W] ZDB-12X14

Brand Zonefirst
Zone First ZDB-12X14 Zone Damper Parallel 2-Position Spring Return 24V [12" H x 14" W]
Honeywell ZD-12X14 Parallel Blade Damper 2-Position Spring Return 24V (12" Length x 14" Height) ZD-12X14

Brand Honeywell
Honeywell ZD-12X14 Parallel Blade Damper 2-Position Spring Return 24V (12" Length x 14" Height)
0
$0.00
0
$0.00
0
ZD12X14TZ
The Honeywell ZD-10X10 Parallel Blade Damper 2-Position Spring Return 24V (10-inch Length x 10-inch Height) is a power close and spring open damper. It has a 24-volt motor used to control circulating air in HVAC systems and used when a normally-open damper is required. The ZD is typically used with the TrueZONE and other electronic zoning systems.

Features

• Mechanical visual position indicator for damper status.
• Solid construction using extruded aluminum frame and blades.
• Parallel blade design for low leakage performance.
• Simple, easy-to-wire, two-wire installation.
• Reliable, strong, 24-volt spring-return motor.
• Fail-safe, normally open operation.
• Ordering Instructions: Order ZD (dimension 1) x (dimension 2). (Motor is always mounted on dimension 2 side.) For example, ZD10x8 is a 10 in. x 8 in. damper with the motor on the 8 in. side; but a ZD8x10 is an 8 in. x 10 in. damper that has the motor on the 10 in. side.
• Damper can be installed in any orientation (mounting side can be on either the bottom or the side of the duct).  
Motor Electrical Rating 24 Vac, 60 Hz, 8VA
Motor Ambient Temperature Rating 40 to 140F (5 to 60C)
Maximum Static Pressure 1 in. wc for all models
Motor Shaft Rotation Clockwise
Motor Mounting Direct connection to damper shaft

Q & A: Ask the Questions, share answers

Do you have questions about this product?


Q: 
Is there a way to both manually open and close the damper in a fail situation?
Asked on May 08, 2023 by Beyan from Wichita
1 Answers

Have an answer? Click Here

A: 
We can not be certain if there is a way to manually open and close the damper as the operation manual states on page 4; "Do not manually open or close the damper as this can damage the actuator". 

The Honeywell ZD12X14TZ is a motorized zone damper designed to regulate airflow in HVAC systems. In the event of a failure, such as a power outage or malfunctioning motor, the damper may become unresponsive to control signals. In such cases, it is important to have a contingency plan to manually open or close the damper.

While specific instructions may vary depending on the installation and configuration of the damper, here are some general steps you can take to manually operate the damper:

  1. Locate the damper: Identify the physical location of the damper within the HVAC system. It is typically installed in the ductwork.

  2. Disconnect power: Ensure that the power to the damper or the HVAC system is disconnected to prevent any potential safety hazards.

  3. Access the damper: Depending on the design, you may need to remove a cover or access panel to reach the damper blades.

  4. Manually open or close the damper: The damper blades are typically connected to a control rod or linkage mechanism. By carefully manipulating this mechanism, you can manually open or close the damper. The specific method may vary, but it usually involves moving the blades into the desired position.

  5. Secure the damper: Once you have manually adjusted the damper, make sure it remains in place by securing it. This can involve reattaching any disconnected parts or using appropriate fasteners.

It is important to note that manually operating the damper should only be done as a temporary solution during a failure situation.

Disclaimer: The suggested methods provided above are intended for informational purposes only. While we strive to offer accurate and helpful guidance, it is crucial to consult a qualified HVAC professional when working with a damper or any HVAC system. HVAC systems can vary in design and installation, and improper handling or manipulation of dampers may lead to equipment damage, personal injury, or safety hazards. Always prioritize your safety and the integrity of your HVAC system by seeking the expertise of a trained professional who can provide proper guidance, diagnose issues, and perform necessary repairs or adjustments.


 
Replied on May 09, 2023 by Ori from Industrial Stores
50d19e9f6f672f2e5941b7dcf85f9aeacee1fa1d99838fdc153bf1d6a8c426fc