1-866-494-4610
Mon-Fri: 9am - 5pm EST
Sat: 9:30am - 4pm EST

1-866-494-4610
Mon-Fri: 9am - 5pm EST
Sat: 9:30am - 4pm EST

Watts 0681040 Direct Operated Water Pressure Reducing Valve 3" 2300

Watts 0681040 Direct Operated Water Pressure Reducing Valve 3" 2300
Images for general purposes only. Actual may be different than depicted.
Watts 0681040 Direct Operated Water Pressure Reducing Valve 3" 2300

Watts 0681040 Direct Operated Water Pressure Reducing Valve 3" 2300

SKU: 0681040
Rating:
Quantity Price Stock
Usually Ships 1 Week
Usually Ships 1 Week
$34,969.85     /ea
Usually Ships 1 Week

This product is Non-Cancelable-Non-Returnable - Check below to Acknowledge*

This product is Non-Cancelable-Non-Returnable - Check below to Acknowledge

0
$0.00
0
$0.00
0
0681040
Watts Series 2300 Direct Operated Water Pressure Reducing Valves

Series 2300 Direct Operated Water Pressure Reducing Valves are designed for dead-end water service where the flow is intermittent and changes rapidly, as on domestic water system. This Series is also installed to regulate the flow of water to such fast acting equipment as flushometers and snap cocks. The Series 2300 is recommended where city water pressure is to be reduced to supply plumbing fixtures to prevent violent pressure fluctuations. The 2300 features Lead Free* construction to comply with Lead Free* installation requirements.

Features:
 
  • An essentially balanced single seat minimizes variation in delivery pressure resulting from varying inlet pressure
  • A large Hycar diaphragm ensures a sensitive response to the slightest changes in reduced pressure
  • Packless design eliminates stuffing box friction
  • Hycar composition single seat provides for dead-end shutoff and prevents pressure-creep when no flow is required
  • Self-aligning design. Eliminates the need for a stem guide in the bottom flanges and removes a point of direct collection that can cause faulty operation
  • Disc and piston are located to minimize the possibility of obstruction by dirt
  • Large pressure plate gives ample support to the diaphragm – assuring long life
  • Self-contained design, requires no control lines
  • All internal parts accessible by removing blind flange or spring chamber. Regular maintenance can be performed with the valve body in line
  • No stuffing box maintenance required

 
Connection Size 3 inch
Maximum Temperature 150°F (66°C)
Maximum Pressure 200psi (13.8 bar)
Reduced Pressure Range 30 – 80psi (207 – 552 kPa)
Body Material Cast Iron
Disc Material Hycar Composition
Trim Stainless Steel
Diaphragm Hycar
Spring Tempered Steel

Q & A: Ask the Questions, share answers

Do you have questions about this product?