The ZD series are extruded aluminum parallel blade dampers compete with a 24 Volt, spring return motor actuator. These dampers are shipped complete and ready for installation. The lightweight ZD can be installed in any position in any properly sized duct. All ZD dampers are rated for duct systems less than 1.0” W.C.
Dampers are available all in even sizes from 8”x8” to 36”x24”. All dampers are 1/8” undersized from their listed size. Dampers are orders as ZDS for side mount, width by height, as the motor and end plate will be on the smaller dimension, for typical insertion into the side/shorter dimension of the duct. The ZDB denotes bottom mount and is ordered height by width. The motor and end plate are on the longer dimension for typical insertion into either the bottom or top of the duct. Dampers are ordered as ZDSwwhh or ZDBhhww, using 2 digits for each dimension.
All ZD dampers are typically shipped as Normally Open dampers that are powered closed and spring returned opened. To order a Normally Closed damper that is powered open and spring return closed, specify the suffix C following ZDS or ZDB. Examples are ZDSC1208 or ZDBC0816.
A 24 Volt AC, 50/60 Hz, spring return damper motor, powers the ZD. The motor power the damper closed and spring returns the damper open for fail-safe operation. Providing power to the damper drives the damper closed. Removing power from the motor allows the motor to spring back to the open position.
The 24 Volt, hysteresis, synchronous motor has been tested to over 250,000 cycles to provide long life. Even replacing the motor is a simple less than one (1) minute change by loosening the setscrew holding the motor onto the damper.
The ZD motor also has a simple adjustment for setting the damper to a minimum position. A minimum position allows for excess by-pass air. To set a minimum position, loosen the setscrew, align the setscrew to the minimum position label and re-tighten.
You have already added a quantity of 0 for this product in your cart that we have available on clearance for this item.
If you would like to buy more than 0, you have an option to purchase from our regular priced inventory. We have a quantity of 0 available at a regular price of 0/each.
If you would like to proceed, you may do so by using the link "Buy Regular Priced Stock" below, or close this popup to buy up to quantity 0 of this item at the clearance price.
We currently have a quantity of 0 available for this item on clearance at a price of 0/each.
If you would like to buy more than 0, you have an option to purchase the balance from our regular priced inventory. We have a quantity of 0 available at a regular price of 0/each.
If you would like to proceed, click the "Buy Regular & Clearance Priced Stock" button below. This action will add the 0 units we have in clearance at 0/each and unit(s) at 0/each to your cart for checkout.
If you only want the 0 units at the clearance prices, click the "Buy Clearance Only" button below, and we will automatically populate the quantity box for the quantity of 0 at the clearance price.
Currently we have a quantity of 0 available at a clearance price. You have already added a quantity of 0 in your cart. You may add another quantity of to your cart from clearance section. To add the additional quantity of to your cart click the button below.
If you would like to buy more than 0, you have an option to purchase the balance from our regular priced inventory. We have a quantity of 0 available at the regular price of 0/each.
If you would like to proceed, you may do so by using the "Buy Regular Priced Inventory" button below, or close this popup and enter the additional quantity you wish to buy of this item at a clearance price.