Overview The V5013N is a three-way threaded globe valve that controls hot water cold water and glycol solutions (up to 50 percent concentration) in heating or cooling HVAC applications. The valves direct flow from one or two inlets to a common outlet. Features Red brass body with NPT-threaded connections. Stainless steel stem and brass plug. Low seat leakage rating < 0.05%. Spring-loaded self adjusting packing. 50:1 rangeability per VDI/VDE 2173. Constant total flow throughout full stem travel. Accurate positioning to ensure state-of-the-art temperature control. Sizes range from 1/2 inch to 2 inches. Valves utilize direct mounting electric or pneumatic valve actuators Q5001 linkage with Modutrol Motor or Q5020/Q5022 linkages with Direct Coupled Actuators to operate the valve. Repack and rebuild kits available for field servicing. Not suitable for combustible gases. Product Specifications Dimensions (in.) 7 5/16 in. high x 4 1/16 in. wide x 1 9/16 in. deep Dimensions (mm) 185 mm high x 103 mm wide x 39 mm deep Maximum Safe Operating Pressure (psi) 217 psi at 248 F Maximum Safe Operating Pressure (kPa) 1500 kPa at 120 C Used With Q5020/DCA ML6984/ML7984 Q5001/Modutrol IV Motor ML6420 21A 25 ML7420/ML7421A/ML7425 Ambient Temperature Range (F) 36 F to 248 F water Ambient Temperature Range (C) 2 C to 120 C water Connection Type Female NPT Body Pattern Three-way mixing A-B-AB porting Pipe Size (inch) 1 in. Pipe Size (DN) DN25 Bonnet Size (in.) 1-3/8 in. Maximum Differential Pressure Ratings (Close-off) (psi) 240 psi For Quiet Water Service--20 psid Maximum Differential Pressure Ratings (Close-off) (kPa) 1655 kPa For Quiet Water Service--138 kPa Capacity (Cv) 11.7 Cv Capacity (Kv) 10 kvs Valve Action Mixing Valve Type Globe Valve Controlled Fluid Chilled or hot water with up to 50% Glycol. Not for use with steam or fuels. Materials (Body) Red Brass Materials (Seat) Integral Brass Materials (Stem) Stainless Steel Flow Characteristic Equal Percentage (A-AB) Linear (B-AB) Actuation Must be purchased separately Static Pressure Rating (psi) Meets ANSI 150 Standard Static Pressure Rating (kPa) Meets ANSI 150 Standard ANSI/ASME Rating 150 Stem Travel (in.) 3/4 in. Stem Travel (mm) 20 mm Bonnet Size (mm) 35 mm Materials (Plug/Ball/Disc) Brass Materials (Packing) Teflon/EPDM Leakage 0.05% of Cv Approvals CRN Number 0C0861.9087YTN/0C0861.123